Guide to SNI Tire Certification Costs in Indonesia
SNI certification is an important requirement for tire products that are subject to mandatory SNI implementation in Indonesia. Products covered by these requirements include passenger car tires, light truck tires, truck and bus tires, motorcycle tires, and motor vehicle inner tubes. In practice, the cost of SNI tire certification is not necessarily the same for every company because it depends on the type of product, number of types or brands, factory location, certification scheme, testing requirements, and services used throughout the certification process.
Therefore, when a company searches for information about SNI tire certification costs, it is important to distinguish between certification fees, laboratory testing fees, assessment or audit fees, sampling fees, and consulting or assistance fees. For product certification conducted through government LSPro, certification service tariffs refer to the applicable PNBP provisions. The government also explains that transportation, accommodation, meals, and daily allowances related to certification activities may be paid by the company in accordance with applicable provisions.
What Determines the Cost of SNI Tire Certification?
The cost of SNI tire certification is generally calculated based on the certification requirements of each company. Therefore, companies should not only consider the certificate issuance fee but calculate all cost components from the beginning of the process until the certificate is issued.
Factors that may affect the cost include:
- Type of tire being certified.
- Number of product types or variants.
- Number of brands submitted.
- Manufacturing facility location.
- Testing laboratory location.
- Number and type of required tests.
- Factory audit or assessment requirements.
- Product sampling.
- Initial certification or recertification.
- Addition of certification scope.
For tire products, testing requirements may also differ depending on the product type. For example, motorcycle tire testing under SNI 101:2019 may include dimensions, TWI, breaking energy, endurance, and high-speed testing.
Components of SNI Tire Certification Costs
Certification Registration Fee
The initial certification stage requires an application to an LSPro with a certification scope appropriate to the product. The registration fee is one of the components included in product certification tariffs.
As an example, the product certification PNBP tariff under Government Regulation No. 50 of 2023 lists a registration fee for domestic business entities of IDR 500,000 per application under the tariff scheme specified in the regulation. However, this amount is only one component and does not represent the total cost of SNI tire certification.
Audit and Assessment Costs
The next cost component relates to quality system document review, management system and production process assessment, and production process assessment where required by the certification scheme.
The amount may depend on the number of auditors, number of assessment days, factory location, and manufacturing process complexity. Therefore, factory audit costs for tire manufacturers in Indonesia and overseas factories may differ.
Sampling Costs
Products submitted for certification must undergo sampling before laboratory testing. Sampling costs are a separate component of the certification tariff.
Government Regulation No. 50 of 2023 includes sampling as one of the product certification service tariff components. Travel expenses and other costs related to assessment activities may also apply in accordance with applicable provisions.
Laboratory Testing Costs
Laboratory testing is an important component when calculating SNI tire certification costs. The required tests depend on the applicable product standard.
For example, motorcycle tires under SNI 101:2019 may require dimension, TWI, breaking energy, endurance, and high-speed testing at government testing facilities.
Because testing requirements differ between tire types, laboratory costs should be calculated after the tire type and applicable standard have been identified.
Certificate Fee
After all evaluation and certification requirements have been successfully completed, a certificate issuance fee applies. Under the product certification PNBP tariff specified in Government Regulation No. 50 of 2023, certificate issuance for domestic business entities is listed at IDR 100,000 per certificate. This amount is only one component and does not represent the total certification cost.
Is There a Fixed Price for SNI Tire Certification?
There is no single fixed price that applies to the entire SNI tire certification process. The total cost must be calculated based on the company’s and product’s specific circumstances.
This is because costs may vary depending on tire type, number of types, number of brands, factory location, audit duration, sample quantity, testing requirements, and auditor travel requirements. The Directorate General of Consumer Protection and Trade Compliance also explains that certification cost information can be provided based on the product type and production facility area, meaning the calculation needs to be adjusted to company-specific data.
Therefore, companies seeking an estimated SNI tire certification cost should first prepare information about the tire type, brand, product type or size, factory location, and whether the company is a manufacturer or importer.
How to Calculate an Estimated SNI Tire Certification Cost
Product Identification
The first step is determining the type of product to be certified, such as motorcycle tires, passenger car tires, light truck tires, or truck and bus tires. This identification is required to determine the applicable SNI standard and relevant testing scope.
For motorcycle tires, for example, LAMANSITU of the Ministry of Trade lists SNI 101:2019 as the quality policy for motorcycle tire products.
Factory Identification
The company must then identify the location of the manufacturing facility. Factory location may affect assessment costs because travel, transportation, accommodation, and other expenses associated with audits or sampling may apply.
Testing Identification
After the product type and applicable standard have been identified, the required tests can be determined. This stage is important because testing costs can represent a significant portion of the total certification cost, particularly when products have many types or require multiple tests.
Calculation of All Components
The final estimate should consider all components, including:
- Registration fee.
- Document review fee.
- Assessment or audit fee.
- Sampling fee.
- Laboratory testing fee.
- Certification review fee.
- Certificate issuance fee.
- Travel, transportation, accommodation, and related expenses where applicable.
- Consulting assistance fees if the company uses certification consulting services.
SNI Tire Costs for Manufacturers and Importers
Cost calculations may differ between local manufacturers and importers. Manufacturers need to prepare their production facilities and quality systems for assessment, while importers need to ensure product conformity and documentation from overseas manufacturers.
For imported tire products, trade requirements may also include the SPPT-SNI and Nomor Pendaftaran Barang (NPB), depending on the applicable requirements for the product and import activity.
Therefore, SNI certification costs should not be calculated solely based on product testing fees. Companies should consider the complete process, including certification application, document evaluation, sampling, testing, assessment, certificate issuance, and post-certification requirements.
Why Use an SNI Tire Certification Consultant?
SNI tire certification requires coordination between the company, LSPro, and testing laboratory. Errors in identifying standards, product types, documentation, or certification scope can extend the process and increase costs.
A consultant can assist companies with initial identification, document preparation, testing requirements, coordination with LSPro and laboratories, and support throughout the certification process. With proper preparation, companies can obtain a more accurate cost estimate before starting the certification process.
Contact Us
Biruni Consulting helps companies with the SNI tire certification process and estimated SNI tire certification costs professionally and in accordance with applicable regulations in Indonesia.
Our services include
- Consultation on applicable regulations.
- Identification of applicable standards.
- Certification document preparation.
- Identification of testing requirements and cost estimation.
- Laboratory testing assistance.
- Factory audit or assessment assistance.
- Certification processing until certificate issuance.
With extensive experience in product certification in Indonesia, Biruni Consulting helps ensure the certification process is properly prepared so companies can understand documentation, testing requirements, and cost components before applying for certification.
Contact Us for consultation, certification assistance, and SNI tire cost estimation based on your product type and company circumstances.
