SNI 4658:2015 Standard for Two-Wheeled Motor Vehicle Wheels
SNI 4658:2015 is an Indonesian National Standard related to technical requirements for wheels used on two-wheeled motor vehicles. This standard is one of the references that manufacturers and importers need to consider when producing or marketing wheel products for motorcycles in Indonesia.
Wheels are important components of a vehicle’s wheel system because they serve as the mounting point for tires and support the vehicle load during operation. Therefore, wheel dimensions, materials, construction, and technical characteristics need to be considered to support vehicle performance and safety.
For companies planning to apply for certification, understanding the scope of SNI 4658:2015, product requirements, testing, documentation, and conformity assessment stages is an important part of preparation before the certification process begins.
What Is SNI 4658:2015?
SNI 4658:2015 is an Indonesian national standard used as a reference for requirements for two-wheeled motor vehicle wheel products according to the scope specified in the standard.
The application of the standard aims to ensure that manufactured or marketed products have characteristics that comply with applicable technical requirements. Assessment may be conducted through product sample testing and other evaluation stages according to the applicable certification scheme.
Companies need to distinguish between product standards, testing, and certification. SNI 4658:2015 serves as a technical reference for the product, while certification is conducted through a Product Certification Body or LSPro based on the applicable conformity assessment scheme.
Scope of SNI 4658:2015
SNI 4658:2015 needs to be applied based on the characteristics of the submitted product. Therefore, companies need to identify the wheel type, vehicle using the product, material, size, construction, and technical specifications.
Product information that needs to be considered includes:
- Two-wheeled motor vehicle type.
- Wheel size and dimensions.
- Wheel material.
- Product construction.
- Load capacity.
- Applicable tire size.
- Brand and type.
- Product technical specifications.
This identification is important because it can determine scope conformity, sample requirements, testing methods, and documents that need to be prepared.
Why Is SNI 4658:2015 Important for Motorcycle Wheels?
Motorcycle wheels carry vehicle loads and operate together with tires under various conditions. Products that do not meet technical requirements may potentially affect the performance of the wheel system and vehicle stability.
Through the application of the standard, product characteristics can be assessed based on predetermined technical parameters. Testing also provides objective evidence regarding the ability of the sample to meet the specified requirements.
For manufacturers, SNI implementation helps maintain consistent product quality. For importers, understanding SNI requirements helps ensure that products to be marketed in Indonesia have been prepared according to applicable regulations.
SNI 4658:2015 Requirements
Certification requirements may differ depending on the certification scheme and product characteristics. In general, companies need to prepare administrative documents, technical documents, and information concerning the production facility.
Documents generally required include:
- Company legal documents and NIB.
- Manufacturer and factory location data.
- Wheel brand and type data.
- Product technical specifications.
- Technical drawings.
- Material information.
- Production process information.
- Quality control documents.
- Product testing data where available.
- Other supporting documents according to certification requirements.
For imported products, documents may also include overseas manufacturer information, production facility address, importer identity, brand, type, and product specifications.
SNI 4658:2015 Certification Process
Product Identification
The first stage is to comprehensively identify the wheel product. The company needs to provide information regarding the vehicle using the product, size, material, construction, load capacity, brand, type, and other specifications.
This information is used to ensure that the product corresponds to the scope of the standard to be applied.
Document Preparation
After the standard has been determined, the company prepares the administrative and technical documents required for certification.
All information in the documents needs to correspond to the actual product. Differences between documents, samples, specifications, and manufactured products may create issues during the assessment process.
Certification Application
The certification application is submitted to an LSPro that has a certification scope covering two-wheeled motor vehicle wheel products.
The LSPro then evaluates the documents and determines the conformity assessment stages according to the certification scheme being applied.
Laboratory Testing
Wheel samples are prepared for testing according to the parameters and methods required by the applicable standard.
Testing may relate to the technical characteristics of the product, including dimensions, construction, material, and other parameters specified by the applicable standard.
The test results are documented in a test report and become one of the bases for determining product conformity.
Factory Audit
Where required under the certification scheme, the LSPro conducts an audit or assessment of the production facility.
The audit may include inspection of raw materials, production processes, equipment, quality control, product inspection, testing facilities, and the manufacturer’s ability to maintain product consistency.
Certificate Issuance
If all conformity assessment requirements have been fulfilled, the process may proceed to certificate issuance according to the applicable certification scheme.
After the certificate has been issued, the company must continue to maintain product quality consistency and comply with applicable marking requirements and other provisions.
SNI 4658:2015 for Imported Motorcycle Wheels
Imported motorcycle wheel products require additional preparation because the certification process involves an overseas manufacturer and an Indonesian importer. Manufacturer information, production facility, brand, type, size, material, and product specifications need to be consistent.
The samples used for testing must represent the products that will be marketed in Indonesia. If a factory audit is required, the production facility in the country of origin also needs to be prepared according to the assessment requirements.
By preparing from the beginning, importers can identify document, sample, testing, and audit requirements before the products are marketed.
SNI 4658:2015 Testing
Testing is an important part of the conformity assessment process. The samples tested must correspond to the submitted product and have clear and traceable identification.
Testing parameters follow the applicable standard and product characteristics. Therefore, companies need to confirm the appropriate standard before determining the laboratory and required number of samples.
In addition to test results, consistency between the test report, technical specifications, product identity, and certification documents also needs to be considered.
Cost of SNI 4658:2015 Certification
The cost of SNI 4658:2015 certification may vary depending on product characteristics and certification scope. Factors that may affect the cost include the number of wheel types or sizes, number of samples, laboratory testing, factory location, factory audit, and certification scheme.
For imported products, the location of the overseas production facility and audit requirements may also affect the overall cost.
Therefore, the cost estimate should be determined based on product data, number of types, wheel sizes, factory location, and the certification requirements of each company.
How Long Does SNI 4658:2015 Processing Take?
The certification processing time may vary depending on company readiness and product complexity. Document completeness, sample readiness, laboratory schedules, audit processes, and test results may affect the overall processing time.
If nonconformities are identified in documents, samples, or test results, the company may need to take corrective action before the process can continue.
Therefore, the estimated processing time should be determined after identifying the product and its certification requirements.
Contact Us
Biruni Consulting helps companies with SNI 4658:2015 for two-wheeled motor vehicle wheels professionally and in accordance with applicable regulations in Indonesia.
Our services include
- Consultation on applicable regulations.
- Identification of applicable standards.
- Certification document preparation.
- Laboratory testing assistance.
- Factory audit or assessment assistance.
- Certification processing until certificate issuance.
With extensive experience in product certification in Indonesia, Biruni Consulting helps ensure products comply with applicable safety, quality, and standard requirements so that they are ready for legal distribution in Indonesia.
Contact Us for consultation, certification assistance, and SNI 4658:2015 certification processing services.
